• AWS-HY
  • Hydraulic Test Stand

The AWS-HY series test stands are designed for the testing of testing of standard and cassette type hydraulic wrenches.

System accuracy is ±0.5% of indicated reading, top 90% of range, which satisfies calibration requirements while the robust features of these stands enables use in the harshest environments.

Hydraulic Tool Testing
For most conventional hydraulic wrenches, the output square is simply inserted into the internal square of the transducer and then the wrench is activated against the reaction device. The maximum torque will be displayed and/or recorded by the torque analyzer.

When testing cassette type hydraulic wrenches, an external square to external hex drive is inserted into the internal square of the transducer and the cassette wrench is placed over the hex and then activated against the reaction device.

The torque reaction forces are very high and the user must take care to insure proper alignment and sufficient strength to safely test these tools.

Features

  • Very accurate and durable transducer.
  • Solid Machined aluminum base for weight reduction and long term durability.
  • Steel reaction posts or aluminum "paddles"provide flexible torque reaction points.
  • Test stand is internally torque accepting so stand is not required to be bolted down.
  • Standard configuration is for test stand to be supplied with internal torque display.

Specifications of Display

±0.5% bidirectional
Oz.in, Lb.in, Lb.ft, Nm, cNm, KgfCm, gfCm, Kgfm
Track, Peak, or First Peak
Rechargable NiMH batteries provide 10-12 hours of continuous use
Small Stand 8" x 8" x 8", Medium Stand 12" x 12" x 12", HD Stand 14" x 19" x 14", Large stand 18" x 24" x 14"
Depends on model
Segmented, four active digits with menus

Downloads

ManualFlyerDrawing

Options

AWS offers custom reaction devices to accomodate virtually any hydraulic wrench. Please contact us and share your specific requirements.

All hydraulic wrenches require square or hex drive adapters in order to test tem.

AWS design and manufactures most common dive sizes - 1/2" through 4 5/8"